HEAVY INDUSTRY MODEL M WEIGH BELT FEEDERS

First designed for steel mill service to feed flux materials (limestone, mill scale, dolomite, iron ore pellets, fluorspar and coke), the Model “MH” has been subjected to extreme environmental conditions-such as abrasive dusts, corrosive fumes, wide temperature fluctuations and vibrations-without any detrimental effects on performance or accuracy. Its rugged construction coupled with the most advanced electronic controls make it truly THE WORLDS MOST RELIABLE WEIGH FEEDER.

Originally designed for steel mill service, Thayer’s Weigh Belt Model MDH benefits put it into a class by it self. The Model MDH offers an extremely robust design with an intense commitment to quality and attention to detail. With over 50 years of weigh belt experience THAYER produces a weigh belt that is highly accurate, rugged and dependable. THAYER feeders are built to endure the rigors of high capacity feeding and heavy density materials ranging in particles sizes from fines to 6 lumps. The bottom line of using a THAYER Model “MDH” in your process translates into reduced operating downtime, lower overall cost and quick return on your investment.

One of Thayer Scale’s specialty equipment lines is the Model “M” Low-Density Feeder line for weighing bulk materials having densities under 10 lb/ft³. A conventional feeder capable of weighing heavier products (typically 50 lb/ft³ and above) to an accuracy of ½% under limited weekly calibration attention, is likely to achieve no better than 3-4% accuracy when weighing a material having a density of only 5-10 lb/ft³.

Thee Model MD is an extremely rugged weigh feeder that was originally designed for the harsh environment of the cement industry but can be used in a wide variety of applications. The Model MD is the ideal weigh feeder when medium to high feed rates are required, handling high bulk density and small through large particle size materials. The Model MD can be subjected to extreme environmentalconditions such as abrasive dusts, corrosive fumes, wide temperature fluctuations and vibrations-without any detrimental effects on performance or ac-

The Model MDL bridges the gap between standard low capacity and high capacity weigh feeders. Some materials are too abrasive for standard low capacity feeders, lump sizes can be too large or flow rates slightly exceed specified limits, resulting in low accuracy and constant maintenance problems. These applications often can’t be reliably handled by larger, high capacity weigh feeders because the relatively low flow rates fall below specified limits. (for example: feeding 1.5 lumps of coal @ 2 STPH). The Model MDL is as ruggedly built as our capacity weigh feeders, to withstand abrasive materials, but is designed to operate at flow rates just beyond the limits of our low capacity feeders.

Newsletter

Subscribe to our newsletter for tips, tricks and product news.

Get Quote

Get Quote